Full standard installation instructions for the general purpose disc coupling are available upon request. For high performance disc couplings, it is normal to produce the instructions on a contract specific basis. These will be supplied upon request with any order. Guidelines are available for assesment at preliminary stages.	The methods of machinery alignment vary according to personal preference. Simple recommended methods are highlighted in our installation instructions which are available upon request. The following is a guide to acceptable misalignments at installation. Note, however, that if machinery growths are			known the valued may be adjusted in the form of pre-deflection, etc. In addition, please note that the values shown here are MAXIMUM. Reduction in these values will reduce bearing loads and improve the allowance for misalignment due to machinery settlement, etc. thus ensuring greater machinery life and trouble free operation of the coupling.
Note: Angular/ Radial as percentage of stated value for 'point a'. Axial as percentage of stated value for 'point c'